Biostar TZ77XE4 Review: Dichotomy by Defaultby Ian Cutress on July 21, 2012 5:00 AM EST
- Posted in
Biostar have always been on the radar for motherboard builders, occupying that niche of ‘bang-for-buck’ if your wallet is looking a little empty this month. In the grand scheme of things they usually do okay, perhaps a little imperfect in the design or not exactly the premium BIOS and software package we have come to expect from top-tier motherboard manufacturers, but today we look at one of their Z77 range, the Biostar TZ77XE4. Visually in orange, it provides something different, but is that true of the whole package? Read on to find out more.
Biostar TZ77XE4 Overview
The Biostar TZ77XE4 forged an ambivalent relationship with me during testing. The design is good, with a full set of video outputs, PCIe laid out appropriately, enhanced Realtek ALC898 audio to 110dB SNR, extra SATA ports, and in the box we should get a USB front panel if you are in the USA. Gaming performance on a single NVIDIA card was similarly worthy of note.
However, performance in other areas was not so great – for whatever reason CPU performance was stagnant compared to other Z77 motherboards, even in our benchmarks that were memory-independent. The additional software needs to be updated; especially the driver and utility install CD that required manual install of each individual driver and utility. The lack of fan headers could also be cited as a concern.
There were memory issues - none of my testing kits wanted to work at XMP - the board is rated at "DDR3-2400+" and I have seen others running it at such, but my DDR3-2400 and DDR3-2133 kits did not want to play ball. For all the testing on the Biostar board, I had to run at a lower memory strap (DDR3-2000 mostly) in order to remain stable. Even a couple of the gaming setups did not work unless I resorted to default SPD. A word from Biostar states that I received an early model before it was entirely finalized, so users should not experience these issues. However, I did experience these issues, and it was odd that in some tests, the Biostar bottomed out (3DPM), but in others it ruled the roost (Metro2033 on a single GTX580).
At an MSRP of $170 (currently at Newegg for $150), there are currently a significant number of motherboards from the main manufacturers that cost less and have competitively better packages, such as the Gigabyte Z77X-UD3H, the ASUS P8Z77-M Pro, the ASRock Z77 Extreme4, and the ASRock Z77E-ITX. That makes the TZ77XE4 a hard sell in all honesty – as a budget-perceived brand, Biostar has to bring something extra to the table. In the past, this has always been the super-low price, but the TZ77XE4 does not qualify for that.
Biostar have characteristically been black and orange, and we see it here again on their top Z77 model, the TZ77XE4. The power delivery is covered with large brightly colored heatsinks to remove heat, both connected via a heatpipe. These heatsinks are set a little away from the Intel designated socket area, though the memory banks are right up against the socket boundary - with only two sticks of memory in the board there will be enough room for most of the beefiest air coolers.
In terms of fan headers, Biostar have unfortunately put much effort in here, with only three to play with - a 4-pin CPU fan header to the top right of the socket, and two 3-pin at the south end of the board. Anyone requiring headers for more than three fans will have to resort to providing their own fan control.
Along the right hand side, apart from the 24-pin power connector, we have a series of eight SATA ports - two SATA 6 Gbps from the PCH, four SATA 3 Gbps also from the PCH, and another two SATA 6 Gbps from an ASMedia controller. These are unfortunately not color coded, meaning users will have to double check every time that the SATA cable is going into the port as intended. Below these we have a two-digit debug display for error reporting which also doubles up as a temperature sensor during normal OS operation.
The chipset heatsink sports the bright orange Biostar color, but is rather small which could lead to it being warm to the touch. On the south side of the board, we are not exactly bursting with headers - aside from the fans, we have front panel headers, a pair of USB 2.0 headers, and power/reset/clear CMOS buttons. These final three buttons are all similar and next to each other, so I can just see myself accidentally pressing the wrong one from time to time. It is also important to note the location of a USB 3.0 header, just above the third full-length PCIe slot. This is a rather awkward place, and cements its use primarily for rear facing adaptors (as long as there is nothing in the PCI slot beside it).
The PCIe layout is better than previous iterations, featuring an x16 (x8 in dual-GPU), x1, x8, PCI, PCI and Gen 2.0 x4. This leaves a space between GPUs, and a spare x1, PCI and x4 when dual GPUs are being used. Note we do not have a molex connector here, suggesting that Biostar are happy with the power delivery when the PCIe slots are in use.
Along the left hand side, you will see a Biostar branded metal shield. Underneath this is a Realtek ALC898 chip, powering the audio. Biostar claim that they have improved the shielding and the isolation for the audio. This results in 110dB SNR; whereas we are normally quoted 108dB SNR or less for the Realtek codec (it states 110dB SNR in the Realtek Whitepaper under ideal conditions). However, you may note that there are no digital audio outputs.
For back panel functionality, we have a PS2 keyboard port, two USB 2.0 ports (black), DisplayPort, HDMI, D-Sub, DVI-I, eSATA, two USB 3.0 (blue), gigabit Ethernet, two more USB 2.0 (black), and audio jacks. I should stress that even though there is a DVI-I on the back panel, it does not accept analog signals by adaptor.
Four DDR3 DIMM slots supporting up to 32 GB
Up to Dual Channel, 1066-2600 MHz
|Video Outputs||DisplayPort, HDMI, DVI-D, D-Sub|
|Onboard LAN||Realtek 8111E|
|Onboard Audio||Realtek ALC898|
2 x PCIe x16 Gen3 (x16, x8/8)
1 x PCIe x16 Gen2 (x4)
1 x PCIe x1 Gen2
2 x PCI
2 x SATA 6 Gbps (PCH), Support for RAID 0, 1, 5, 10
4 x SATA 3 Gbps (PCH), Support for RAID 0, 1, 5, 10
2 x SATA 6 Gbps (ASMedia Controller)
1 x eSATA 3 Gbps
4 USB 3.0 ports (2 back panel, 2 from headers)
8 USB 2.0 ports (4 back panel, 4 from headers)
4 x SATA 6 Gbps
4 x SATA 3 Gbps
1 x USB 3.0 Header
2 x USB 2.0 Header
3 x Fan Headers
1 x CIR Header
1 x SPDIF Output Header
1 x Front Panel Audio Header
1 x 24-pin ATX connector
1 x 8-pin 12V connector
1 x CPU Fan Header (4-pin)
2 x SYS Fan Header (3-pin)
1 x PS/2 Keyboard Port
1 x eSATA
2 x USB 3.0
4 x USB 2.0
1 x DisplayPort
1 x HDMI
1 x DVI-D
1 x D-Sub
1 x Gigabit Ethernet
|Warranty Period||3 years from date of sale|
Aside from the extra SATA controller, PCI slots, Power/Reset buttons and the use of all four display outputs, there's nothing much 'extra' that Biostar have put on the board which isn't already in the default chipset. This could perhaps be their downfall when it comes to conclusions after testing.
Post Your CommentPlease log in or sign up to comment.
View All Comments
Epicac - Saturday, July 21, 2012 - linkI've heard horror stories from Biostar and ECS Motherboard owners. Even a cheap board from either of these manufacturers wouldn't tempt me.
StevoLincolnite - Saturday, July 21, 2012 - linkPeace of mind goes a long way!
Snotling - Saturday, July 21, 2012 - linkI deal toasted PC components every week... motherboards, videocards, DVD players, hard drives. As far as I know they (Biostar) are no worse than Asus or any other actually. for the exception of one biostar Mobo that was DOA I can't remember seeing one that was defective.
They are great for repairs because you can usually get that 4 year old Biostar Mobo "new" at retailers when all other makers are only available used.
Olaf van der Spek - Saturday, July 21, 2012 - linkI've heard horror stories from Asus and Gigabyte owners.....
yyrkoon - Sunday, July 22, 2012 - linkSo basically, you're posting only to spread F U D ? I've heard lots of things. That I do not repeat because I have no personal experiences. But along those lines. I suppose any idiot who hasn't a clue how to build a system can relate many horror stories. Hell, when I first started building my own systems back in the early 90's. I completely destroyed a brand new hard disk. By low level formatting the drive from the BIOS.
Not only that. When ABIT was still in the motherboard business. I had read many "stories" of how people had such a hard time with their boards. Yet . . . I've been a long time ABIT motherboard "fan". Why ? I always knew what to expect from their products, and they were always very stable .
Yes, I agree. Except my own personal experiences would leave me to believe that BIOSTAR > Asus. Like you. I received DOA parts. Except it was not just one. It was four in a row through two different dealers.
Then for personal parts. I will not even touch their budget brand sister company. The reason why is simple. Based on a review from this very same site. I went out and bought a system board for my budget PC. I experienced several problems. Some of which were correctable. Some which were fatal flaws. Such as the PC locking up after 2-5 days ( completely random ). Having spent two weeks on the phone and emailing tech support I called no joy, and started looking for another board. Then wouldn't ya know. when replaced with an ABIT board ( that even cost less ). All the problems went away. That was 6-7 year ago. The system still runs rock solid to this day.
The last system I built for myself was based on an ABIT IP35-E motherboard. This system is also running to this day. Zero crashes, unless I was doing something I should not have been doing. Such as pushing an overclock too far . . .
So yeah I am a bit biased when it comes to name brands. I would never touch asrock, unless a customer insisted. I do not use Asus motherboards in any of my own systems, and strongly recommend against customers using them( if asked ). However. My own personal laptop is branded Asus . . . and I love it. Go figure lol.
AVP - Saturday, July 21, 2012 - linkI've had better luck with biostar than abit or asus.
Wixman666 - Monday, July 23, 2012 - linkI've sold plenty of every type of board under the sun over the years and Biostar boards are no worse than any other as far as QC goes. ECS are the worst however, historically speaking, on their budget line at least.
najames - Tuesday, July 24, 2012 - linkI built an ECS AMD socket 754 system, sent it to my brother years ago, and they are still using it today.
The best motherboard I've ever owned since the mid 80s has been a little Biostar T series board with a dinky AMD dual core, happily overclocked if asked. I reluctantly sent it to my nephew when his system crapped out and he is still using it today AFAIK.
My current collection of Asus, Gigabyte, and Intel boards are no better/worse. They likely just have some better features.
ggathagan - Tuesday, July 24, 2012 - linkWhile most motherboard makers have had periods of bad QC, the chipset involved always has to figure into the mix, whether you look at stability or flakiness.
Without factoring that into the equation, one bad experience with a big name brand is no more indicative that a rock-solid experience with a lesser-known brand.
The fact that everyone (chip designers, fab work, motherboard makers and end-users) is always pushing for more performance in shorter spans of time does no one any favors, but we all persist in that approach.
As such QC history can vary widely at any company.
johnsmith9875 - Saturday, August 11, 2012 - linkI tossed my flaky, cranky genuine intel board and bought a biostar and haven't looked back since.
I think Biostar has improved significantly over the years, its no longer down there in PCChips territory.