Overclocking has generally been the domain of enthusiasts with desktop rigs. Though more recently we have seen even SFF PCs joining the bandwagon – Intel's Hades Canyon NUC, for example, supports overclocking the CPU as well as the GPU. However, increasing the CPU frequency beyond the official specifications is not the only way to extract more performance from a computing system. Memory-bound workloads can benefit from memory hierarchies with increased bandwidth and/or lower latencies.

We last looked at DDR4 memory scaling effects on SFF PCs when we experimented with different SO-DIMMs in the Skull Canyon NUC (NUC6i7KYK) based on the Skylake platform. Current SFF PCs are based on Coffee Lake, which brings in more cores while keeping power efficiency in mind. Compared to the Skylake memory controller's official limit of 2133 MT/s, the Coffee Lake memory controller ships with DDR4-2666 supported out of the box. In this article, we explore the effects of varying DDR4 SO-DIMM frequencies and timings on a SFF PC with a standard Coffee Lake desktop CPU.


Since the introduction of DDR4 support in the Skylake platform, we have seen expanded support for overclocked memory kits on both the desktop and notebook segments. On standard non-overclocked systems, the DDR4 memory controller in Coffee Lake desktop CPUs operates at 2666 MT/s, while the U-series CPUs have a 2400 MT/s interface. DDR4 DIMMs operating as high as 4266 MT/s are available for desktop systems with full-sized memory slots. On the SO-DIMM side, we have seen various vendors introduce kits operating between 2133 MT/s and 3200 MT/s. While 2400 MT/s has become the de-facto SO-DIMM frequency for current systems, the usage of desktop CPUs in SFF PCs such as the ASRock DeskMini have ensured that the higher frequency SO-DIMMs also have adoption.

At the time of our Skull Canyon NUC memory scaling experiments, the number of SFF PCs supporting overclocked SO-DIMMs was very few. Since then, we have had numerous SFF systems utilizing desktop CPUs go through our test bench – the Zotac ZBOX MAGNUS EN1080K and the ASRock DeskMini GTX bring prime examples. For today's article we chose the latter for our experiments; the BIOS includes XMP support, making it very easy to get the SO-DIMM kits running at their higher-rated frequencies.

With memory prices still running quite high, we shifted from the 2x16GB configurations used in our Skull Canyon memory scaling piece to 2x8GB configuration for the Coffee Lake experiments. To this end, we procured some of Team Group's T-Force Vulcan SO-DIMMs, which are available in both 2400 MT/s and 2666 MT/s speed grades. Meanwhile to look at higher memory speeds, we also picked up one of Kingston's HyperX Impact 3200 kits.

The rest of this review deals with the quantitative measurement of the effectiveness of different types of DRAM in the ASRock DeskMini GTX (Z370). In order to do this, we processed various benchmarks while keeping everything other than the DRAM SO-DIMMs constant. Each configuration was booted to BIOS multiple times to ensure that the SPD information was properly parsed and the optimal frequency / timing parameters chosen. Once the OS was booted, we also checked with multiple hardware monitoring tools that the parameters indicated by the BIOS for the DRAM SO-DIMMs were indeed what the OS was also seeing.

ASRock DeskMini Z370 GTX1060 Specifications
Processor Intel Core i7-8700
Coffee Lake-S, 6C/12T, 3.2 GHz (Turbo 4.6 GHz), 14nm++, 12 MB L2, 65W TDP
Memory - Option 1 Team Group T-Force Vulcan TLRD416G2400HC15BDC-S01 DDR4 SO-DIMM
15-17-17-35 @ 2400 MT/s
2x8 GB
Memory - Option 2 Team Group T-Force Vulcan TLRD416G2666HC18F-SBK DDR4 SO-DIMM
18-18-18-38 @ 2666 MT/s
2x8 GB
Memory - Option 3 Kingston HyperX KHX3200C20S4 DDR4 SO-DIMM
17-19-19-39 @ 2933 MT/s
2x8 GB
Memory - Option 4 Kingston HyperX KHX3200C20S4 DDR4 SO-DIMM
20-22-22-42 @ 3066 MT/s
2x8 GB
Graphics NVIDIA GeForce GTX 1060 (6GB GDDR5)
Disk Drive(s) Team Group Cardea Zero TM8FP2240G0C111
(240 GB; M.2 Type 2280 PCIe 3.0 x4 NVMe; Toshiba 15nm; MLC)
Networking Intel Dual Band Wireless-AC 3165
(1x1 802.11ac - 433 Mbps)
1x Intel I219V Gigabit LAN
Audio 3.5mm Headphone Jack
Capable of 5.1/7.1 digital output with HD audio bitstreaming (HDMI)
Miscellaneous I/O Ports 2x USB 2.0
5x USB 3.0 (Type-A)
1x USB 3.0 (Type-C)
Operating System Retail unit is barebones, but we installed Windows 10 Pro x64
Pricing (As configured) $1100 - $1138
Full Specifications ASRock DeskMini Z370 GTX1060 Specifications

In the next section, we will first take a look at the specifications of the three SO-DIMM kits / four configurations that were evaluated in the ASRock DeskMini GTX Z370, along with the AIDA64 Memory Bench for each. Following this, we present the results from our updated test suite for SFF PCs and workstations - SYSmark 2018, Futuremark / UL benchmarks, SPECworkstation 3 etc. Prior to our concluding remarks, we take a look at a few miscellaneous aspects such as pricing.

DRAM Options for the ASRock DeskMini GTX (Z370)
Comments Locked


View All Comments

  • BedfordTim - Wednesday, November 28, 2018 - link

    It would have been interesting to see some bargain basement memory in the comparison. Is there a specification below which we start to see a difference?
  • goatfajitas - Wednesday, November 28, 2018 - link

    I dunno, I think it gets the job done. The takeaway is the same as it has been for a decade... Higher bandwidth memory with higher latency provides very little actual performance improvements.
  • qlum - Wednesday, November 28, 2018 - link

    To add some qualifiers to what you said:
    In regards to cpu performance
    on intel's core achitecture

    IGP performance, AMD, certain memory limited workloads tell a different story.
  • goatfajitas - Wednesday, November 28, 2018 - link

    "on intel's core achitecture"

  • Flunk - Wednesday, November 28, 2018 - link

    No, not really. The slowest and faster RAM here aren't that far off. What it really tells us is that minimal increases in RAM performance can bring noticeable performance improvements but only in memory-heavy applications. Which is pretty much exactly what you'd expect.
  • goatfajitas - Wednesday, November 28, 2018 - link

    "No, not really. The slowest and faster RAM here aren't that far off."

    That is what I said. Barely noticeable even in synthetic benchmarks.
  • BedfordTim - Wednesday, November 28, 2018 - link

    There is a difference in two memory heavy applications. The RAM drive shows a ~20% benefit and one of the image processing benchmarks shows ~10% benefit.
    There will be a tiny number of people doing very specific applications who might notice the difference.
  • peterfares - Wednesday, November 28, 2018 - link

    Not sure what other games it applies to but in Overwatch the RAM speed actually has a pretty significant impact on FPS when you start going very high FPS.


    Not sure what what speed the benefits stop, but improvements were still easily seen at 3200MHz.
  • Death666Angel - Wednesday, November 28, 2018 - link

    It just seems a bit weird to test those speeds. G.Skill RipJaws SoDIMM DDR4-3200 CL18-18-18-43 are available in 8GB form for the same price as regular DDR4-3200 RAM and the 16GB variant is only slight more expensive (would be 5th in the price ranking with regular DDR4-3200 RAM). Is that just a weird German price thing? I was even considering buying them with an adapter just so I can have some more potential usability for the future. :D
  • deil - Wednesday, November 28, 2018 - link

    IMHO small things that does not even make the cpu leave lower power state happens faster, page loading, folder browsing etc...
    might be just bias or simple "better timings" that was also the case for me. Still I feel something different in day-to-day stuff.

Log in

Don't have an account? Sign up now