Visual Inspection

Looking very closely at the GIGABYTE B550I Aorus Pro AX motherboard, it has a small but capable frame with a very neutral aesthetic. It employs a primarily black and grey design, with a silver combined chipset and front-mounted M.2 heatsink, with one section of RGB LED lighting, which lights up the board's underside along the right. For users looking to add a little more pizazz, GIGABYTE includes an addressable and regular RGB LED strip pairing compatible with a lot of different RGB ecosystems, including Corsair's iCUE and NZXT CAM. However, GIGABYTE has its own called RGB Fusion 2.0.

Despite being mini-ITX, the GIGABYTE B550I Aorus Pro AX has plenty to focus on. Looking at expansion support, there is a single full-length PCIe 4.0 x16 slot, with the capability to install up to one PCIe 4.0 x4 M.2 slot on the front of the board, with a second slot on the rear of the PCB with support for both PCIe 3.0 x4 and SATA drives. There are four SATA ports for SATA devices, which are all straight angled and sit directly below the 24-pin ATX 12 V power input. These SATA ports do include support for RAID 0, 1, and 10 arrays, and they don't share bandwidth with any of the M.2 slots, even when SATA based M.2 drives are installed. 

Users familiar with the mini-ITX form factor can appreciate that there will be limitations in connectivity, both internal and external. One of these is prevalent in its support for cooling, with just three 4-pin fan headers available on the B550I Aorus Pro AX model. One of these is dedicated to a CPU fan, while the other two are for chassis fans, although AIO pumps are supported through all three headers.

Memory compatibility looks strong with GIGABYTE's official support for up to DDR4-5100 memory, with a total capacity of up to 64 GB. Both of the memory slots and the full-length PCIe 4.0 x16 slot come with PCIe armor, designed to reinforce the slot to avoid physical damage to the slots when installing hardware. This also gives the slots better structure for heavier components such as NVIDIA's latest RTX 3090 graphics card, which is notoriously large and bulky.

For the power delivery, GIGABYTE is using an 8-phase design, which is being controlled by a Renesas RAA229004 PWM controller. The configuration is split into a 6+2 configuration, with six premium Intersil ISL99390 90 A power stages for the CPU and two ISL99390 90 A power stages for the SoC. On paper, this is one of the most capable mini-ITX models from the B550 models in regards to maximum power output to the CPU, with a maximum output of up to 540 A for the CPU. Delivering power to the CPU is a single 8-pin 12V ATX power connector.

The power delivery heatsink is interconnected to the M.2 and chipset heatsink, a common theme on mini-ITX models. It doesn't include finned heatsinks, so it relies primarily on mass, although the heatsink's top will catch airflow within a chassis. Unlike the X570 variant, there is no cooling fan above the chipset heatsink, which is a plus as it should be more than adequate without one.

The GIGABYTE B550I Aorus Pro AX is using a simplistic yet premium audio setup. It includes three Japanese Nichicon gold audio capacitors, with the driving being done by a Realtek ALC1220-VB HD audio codec. This is cramped in directly next to the end of the full-length PCIe slot, with no EMI shielding and no visible audio PCB segregation. There is also a front panel audio header, which is also powered by the ALC1220HD codec, although it is in this funny little position. This might interfere with the backplates on some of the larger graphics cards.

For a small board such as this one, it has an acceptable amount of connectivity on the rear panel, which is largely down to space restrictions. Starting with USB, the B550I Aorus Pro AX makes use of two USB 3.2 G2 ports, one Type-A, and one Type-C, with four additional USB 3.2 G1 Type-A ports. While this in itself isn't a lot, GIGABYTE does include a USB 3.2 G1 and USB 2.0 front panel heading pairing, which each allows a further four ports (two each) to be added to the system. The networking configuration is premium, with a Realtek RTL8125 2.5 GbE port, with two antenna ports for the Intel AX200 interface with Wi-Fi 6 and BT 5.0 support. Three 3.5 mm audio jacks are driven by a Realtek ALC1220-VB HD audio codec, while a trifecta of video outputs consisting of two HDMI 2.1 and a DisplayPort allows users to utilize the Ryzen 4000 APU's. Finishing off the rear panel is a Q-Flash Plus button.

GIGABYTE B550I Aorus Pro AX Overview BIOS And Software
POST A COMMENT

75 Comments

View All Comments

  • mopelo - Monday, December 14, 2020 - link

    I get paid more than 120 to 130 per hour for working online. I heard about this job 3 months ago and after joining this i have earned easily 15000$ from this without having online working skills. This is what I do.....___https://bit.ly/37iSHNX Reply
  • Ronzino - Sunday, January 24, 2021 - link

    This mobo is more than wonderful just because it offer two pcie slots,simply buying an adaptor from m2 to pcie16x(4x electrical), you can use the back m2 slot as an addition slot. It is exactly what I was looking for... Mini itx with 2 pcie slots. Reply
  • worldnewsnow - Friday, March 12, 2021 - link

    https://nativenewspost.com/
    https://nativenewspost.com/best-deals/
    https://nativenewspost.com/news/entertainment/
    https://nativenewspost.com/news/business/
    Reply
  • Samuel Vimes - Saturday, March 13, 2021 - link

    In mini-ITX format, the MPG B550I GAMING EDGE WIFI is IMHO the better choice because of its M.2 active cooling (when we know PCIe Gen4 SSD tend to heat-throttle). It's PWM regulated so its temp-speed curve can be adjusted (or switched off) so it's all bonus, and in a cramp mini-ITX build (not a test bench), the active Gen4 cooling will make a difference. Reply
  • Flying Aardvark - Wednesday, April 14, 2021 - link

    Samuel Vimes that is a valid point. That said, I always prefer fanless boards. It's not really "help" to add a fan.. you can add any (industry standard) fan you'd like to anything. No reason for vendors to help us with that, which is often a difficult to source and replace proprietary fan. At minimum they need to advertise they're using a standard 40mm fan so you can drop in a Noctua or whatever you like instead. I use an Asus X470-i but my favorite board on the market today is this Gigabyte B550i. Both of the Asus 500 series boards have fans on them, but they're used on the VRM directly not the M.2 so it's even worse than what MSI did. Reply

Log in

Don't have an account? Sign up now