The very first hard disk drives (HDDs) were demonstrated by IBM back in 1956 and by the early 1980s they became the dominant storage technology for all types of computers. Some say, hard drives are no longer relevant as solid-state drives offer higher performance. According to Seagate Technology, HDDs will remain in the market for at least 15 to 20 years. In a bid to remain the primary bulk storage device for both clients and servers, hard drives will adopt a multitude of technologies in the coming decade.

“I believe HDDs will be along around for at least 15 years to 20 years,” said David Morton, chief financial officer of Seagate, at the Nasdaq 33rd Investor Program Conference.

Sales of HDDs Decrease, But Technology Keeps Evolving

Sales of hard disk drives have been decreasing for several years now. Total available market of HDDs dropped to 118 million units in the third quarter of 2015, according to estimates by Seagate Technology and Western Digital Corp. By contrast, various makers of hard drives sold approximately 164 million units in Q3 2010, the two leading manufacturers claim.

Shipments of HDDs decrease due to a variety of factors nowadays, including growing popularity of solid-state drives (SSDs), drop of PC sales, increasing usage of cloud storage and so on. Nonetheless, HDDs remain the most popular data storage technology, which is also the cheapest in terms of per-gigabyte costs. While SSDs are generally getting more affordable, high-capacity solid-state drives are not going to become as inexpensive as hard drives any time soon. As a result, HDDs will remain a key bulk storage technology for a long time.

To stay relevant in the long term, hard disk drives need to keep increasing their capacity. Last year ASTC (Advanced Storage Technology Consortium), an international organization that unites various companies who develop, manufacture or use hard disk drives, unveiled its vision of the HDD future. According to this technology roadmap, capacity of hard drives will rise to 100TB by 2025. In the coming years HDDs will adopt many new writing technologies in a bid to bolster their data storage capacities.

PMR, SMR and Helium

Modern hard disk drives are based on perpendicular magnetic recording (PMR) and shingled magnetic recording (SMR) technologies. PMR-based drives have been around for about a decade and will remain popular for years to come thanks to their relatively high sequential performance, low cost per gigabyte, and well-understood reliability.

HDDs that use shingled recording write new tracks that overlap part of the previously written magnetic tracks. The overlapping tracks may slowdown writing because the architecture requires HDDs to rewrite adjacent tracks after any writing operation. While SMR allows increasing areal density of hard drives to 1.1 Tbit per square inch or even higher, performance of such HDDs may be lower compared to performance of PMR-based devices. In a bid to “conceal” peculiarities of SMR, which can slowdown performance, makers of HDDs develop special firmware or even alter software applications that use such hard drives in datacenters.

To boost capacities of PMR and SMR hard disk drives today without increasing areal densities, HDD makers need to install more platters into their devices. While it is possible to fit six disks into a standard 3.5” HDD thanks to new technologies, more platters require major redesigns and use of helium inside the drives. The density of helium is one-seventh that of air, which reduces drag force acting on the spinning disk stack and lowers fluid flow forces affecting the platters and the heads. The lower density of helium allows to fit up to seven disks into one drive today, reduce power consumption of HDD motors and improve accuracy of arm’s positioning, something that is important for high bit densities too. Unfortunately, hermetically sealed helium-filled HDDs are rather expensive to manufacture, which is why at present they are positioned for datacenters.

At present only HGST, a wholly-owned subsidiary of Western Digital, ships helium-filled Ultrastar He and Ultrastar Ha hard disk drives in high volume. The company sold around 1.1 million sealed HDDs in Q3 2015 and demand for such drives is increasing. Seagate Technology plans to introduce its helium-filled HDDs in the first half of 2016.

TDMR Incoming

Earlier this year Seagate announced plans to start commercial shipments of hard disk drives featuring two dimensional magnetic recording (TDMR) technology in the next couple of years. Heat-assisted magnetic recording technology (HAMR) — that has been demonstrated for multiple times so far by various manufacturers of hard drives, heads and platters — is still not ready for prime time, according to Seagate. The world’s second largest maker of HDDs claims that reliability of devices based on HAMR is not sufficient, which is why the tech will be used commercially at a later date.

“We talked last year about two dimensional magnetic recording, we will be ready to ship that in the next year or two,” said Dave Mosley, president of operations and technology at Seagate, at the company’s analyst and investor strategic update conference in September. “HAMR is still not ready for prime time, I was not tremendously happy with the progress made last year, but there was a progress.”

TDMR technology allows to increase areal density of hard disk drives by making HDD tracks narrower and pitches even smaller than today. Since tracks are projected to become narrower than actual magnetic read heads, it will get increasingly hard for the latter to perform read operations because nearby tracks will create too much inter-track interference (ITI). HDDs featuring TDMR technology counteract ITI by reading data from multiple nearby tracks and then determining which data is needed. The industry is working on several implementations of TDMR. It is possible to read data from multiple adjacent tracks using one reading head, but that greatly reduces performance of HDDs. Alternatively, it possible to use an array of heads to read data from several nearby tracks. While such approach guarantees rather high performance, it is very hard to build a complex array of multiple readers. TDMR lets HDD makers to increase areal density by 5 to 10 per cent, according to Seagate. Moreover, it also solves ITI problems that will likely occur in the future. As a result, it is logical to expect all HDD makers to use two dimensional magnetic recording technology in the future.

HAMR Not Ready for Prime Time

Hard drives featuring heat-assisted magnetic recording technology — as the name implies — record data on high-stability magnetic media with laser thermal assistance to reduce its coercivity for a very short amount of time. Seagate’s HAMR technology heats media to approximately 450°C using a laser with 810nm wavelength and 20mW power, according to details revealed by the company earlier this year. The method helps to reduce size of magnetic “pitches” without undesirable effects on readability, write ability and reliability.

Hard drives with HAMR technology will sport significantly higher areal densities — around 1.5Tbit per square inch initially and 2Tbit per square inch shortly after introduction — and will be able to store noticeably more data than today’s HDDs featuring perpendicular recording technology. Eventually, companies like Seagate expect that HAMR will help to increase bit densities of hard disk drives to 5Tbit per square inch. While TDMR technology is important, HAMR will mean a breakthrough for areal densities and capacities of HDDs.

“The highest areal density that we see today have to be written with HAMR,” said Mr. Mosley. “We still have some issues working through the reliability. We have actually solved a lot of problems, but the whole industry — through various consortiums — is really focused on getting the last of the problems solved so we could get [HAMR] into the products.”

Seagate hopes to deliver its first HAMR-powered hard disk drives with 4TB capacity sometimes in late 2016 or early 2017 to select clients. The customers are expected to tryout the HDDs in their datacenters, verify that HAMR drives are compatible with their infrastructure, and are generally reliable. Volume shipments of HAMR-based HDDs are now expected to start in late 2017, or even in 2018. Unfortunately, at this point the HAMR roadmap is not completely clear. 

Long Road Ahead

In addition to two dimensional magnetic recording and heat-assisted magnetic recording technologies — that Seagate expects in commercial products in 2016 – 2017 and beyond — other technologies are being researched by the industry. Among those already disclosed are Bit Patterned Media Recording (BPMR), Heated Dot Magnetic Recording (HDMR), Microwave-Assisted Magnetic Recording (MAMR) and some other. In the future, hard disk drives will adopt combinations of various technologies to maximize bit densities and capacities.

Technologies like TDMR, HAMR or BPMR will be commercialized by manufacturers like Seagate, Western Digital and Toshiba. However, there are many companies and universities, who explore technologies for future hard disk drives. For example, reliability of HAMR-based HDDs is something addressed by the whole industry, not just by Seagate or Western Digital. Such collaborative approach and with continuing investments into fundamental magnetic recording research increases the likelihood of many technological breakthroughs going forward. The latter may guarantee that HDDs will remain relevant for a long time — for at least 15 to 20 years, according to Seagate.

If HDDs remain in the market in 2035, it will mean that the technology will have served the humankind for about 80 years at the time, which is a very long period for any high-tech industry. By the time, HDDs will have outlived floppy discs, cassettes, CRT displays and televisions as well as numerous manufacturers of hard drives.

Comments Locked


View All Comments

  • nandnandnand - Friday, December 18, 2015 - link

    People want to hear about new HDD technologies.

    V-NAND has postponed the demise of NAND. Post-NAND technologies have been long promised but have yet to appear. Even Intel's 3D Xpoint will occupy a tier between and alongside DRAM and NAND due to expense.
  • JimFoster - Friday, December 18, 2015 - link

    Hmm. I doubt I will ever buy a computer with a HDD again. The last time I did was five and a half years ago. But for my NAS hard drives (Western Digital Red) make sense to me.
    Anyway, I thought I had the latest and greatest. A Dell XPS 13 with Skylake and Samsung NVMe SSD. But it turns out Intel and Micron have this technology called 3D XPoint.
  • jjj - Friday, December 18, 2015 - link

    Don't get too excited about xpoint just yet, they'll try to milk it as much as they can. Building capacity is rather costly so they won't convert much to it at first. On the upside DRAM prices have dropped plenty recently and xpoint has to be cheaper so we could see 80GB xpoint SSDs at 199$ , if not now then with the second gen xpoint that is supposed to arrive pretty soon.
    The real fun will be when a bunch of other new memories become available (xpoint seems likely to be a stopgap product).
  • jjj - Friday, December 18, 2015 - link

    As for storage, how about in 10 years from now when you have 3D ReRAM at 10$ per TB ( if not 2-3 times cheaper). How much cheaper would HDDs need to be to convince you to buy one? Ofc the average Joe doesn't need all that much home storage and NAND will be affordable for such buyers soon enough.
  • nandnandnand - Friday, December 18, 2015 - link

    ReRAM/Crossbar/memristors are empty promises until they hit the market, but once they do appear they could rapidly make up lost ground. NAND has a great chance of killing the hard drive. The only problem the industry has right now is lowering the cost per terabyte. V-NAND is helping to drive prices down. The days when $0.50/GB was a good deal are gone.

    If Samsung wanted to, they have the technology to put out a 256 terabyte 2.5" drive (using both V-NAND and TSV stacked dies) TODAY.
  • jjj - Friday, December 18, 2015 - link

    Everything else aside, one thing needs to be clarified.
    Samsung doesn't have NAND with TSV, even less so 3D NAND with TSV where it would be a lot harder to do TSV and rather wasteful (die area wise).
  • extide - Friday, December 18, 2015 - link

    The thing about SSD's is that the cost of the NAND makes the product essentially have no market. Sure they could build a drive with way more capacity, but if they have to sell it at $4k or $8k or something then they will sell so few they would never have a chance to make money on the product.
  • rhangman - Saturday, December 19, 2015 - link

    Just give me a cheap 8TB SSD so I can replace my 3TB HDD's. Doesn't really even need to be faster than a HDD, just cheap, reliable and low power. Surely there is a market other than me for NAS/stprage SSD's? Less power than a HDD, also cooler and silent.
  • Hulk - Friday, December 18, 2015 - link

    Hard disks are cheap/GB and have fantastic retention. This will make them useful for quite some time.
  • mikegrok - Friday, December 18, 2015 - link

    I want a 5 1/4 full height drive

Log in

Don't have an account? Sign up now