OCZ Introduces Z-Drive 6000 Enterprise PCIe SSD Series with NVMe Supportby Kristian Vättö on May 20, 2015 8:10 AM EST
- Posted in
- Enterprise SSDs
- Z-Drive 6000
Back at CES OCZ teased us by showcasing the Z-Drive 6000, but the drive was still under development, so the details were rather scarce. Today OCZ is finally lifting the curtain and making a formal announcement of the Z-Drive 6000 series, the company's first NVMe compliant SSD.
We've talked about NVMe in the past, but in short it's a software/driver stack that replaces the ancient AHCI. NVMe has been designed for SSDs from the ground up and its main benefits are scalability (up to 64,000 outstanding commands versus 32 in AHCI) and streamlined software stack that reduces both latency and CPU overhead for higher and more efficient performance. The Z-Drive 6000 series supports the native Windows (8.1 & Server 2012 R2), Linux, UNIX, Solaris, and VMware NVMe drivers, although OCZ will also have custom NVMe drivers for Windows, Linux, and VMware for drive management reasons. The current native drivers lack some necessary management features (e.g. I still haven't found a way to secure erase an NVMe drive with the in-box drivers), so in order to have the features available at launch OCZ is offering a custom driver. That said, OCZ is fully invested in improving the native open source drivers, but the problem is the long turnaround time for updates that has created the need for vendor-specific drivers.
|OCZ Z-Drive 6000 Series Specifications|
|Capacities||800GB; 1,600GB & 3,200GB|
|Form Factors||2.5" 15mm (SFF-8639)||2.5" 15mm & HHHL AIC|
|Interface||PCIe 3.0 x4 (NVMe 1.1b)|
|NAND||Toshiba A19nm 128Gbit MLC||Toshiba A19nm 128Gbit eMLC|
|Endurance||1 DWPD||3 DWPD|
|Power Loss Protection||Yes||Yes|
The Z-Drive 6000 series comes in two flavors: 6000 and 6300. The underlying controller and firmware architectures are the same in both models and the difference lies merely in NAND: the 6300 uses more durable eMLC NAND, which increases the endurance to three drive writes per day from one in the 6000 with normal MLC. Due to the endurance, the 6000 is aimed more towards read-intensive applications such as online archiving and media streaming, whereas the 6300 is suitable for mixed workloads that includes for example big data analysis and financial transaction services.
Unlike Intel, OCZ doesn't offer a model for write-intensive workloads with super high endurance (10 DWPD). OCZ explained to me that the reason is mostly cost efficiency -- a high endurance drive is doable, but it would require additional over-provisioning (which is what Intel does) that would increase the cost. OCZ did some market research and concluded that most customers are seeking for lower cost NVMe drives to make the transition, so OCZ didn't see a huge niche for the expensive high endurance drives. At $1.70 and $2.00 per gigabyte, the Z-Drive 6000 series is certainly price competitive against Intel's P3x00 series and the premium isn't too large compared to the enterprise SATA/SAS SSDs.
At the time of launch, the Z-Drive 6000 series will be available in capacities of 800GB, 1.6TB and 3.2TB. OCZ does, however, have a 6.4TB Z-Drive 6300 in development, which is scheduled to be available in Q4'15. The reason for the delay lies in NAND because in order to fit 8TB of flash inside a 2.5" chassis, OCZ needs to use 16-die packages, but currently the price of those is, from what I have heard, approximately 3x higher per gigabyte compared to 8-die stacks. The production as well as yields are expected to ramp up during this year, so the 6.4TB Z-Drive 6300 will be available once the NAND is available in high volume and at a reasonable price.
The Z-Drive 6000 series employs PMC-Sierra's "Princeton" controller, which is a native NVMe controller with support for 16 NAND channels. The controller supports PCIe 3.0 x8 interface, but OCZ has decided to split that to offer two independent 3.0 x4 connections to the host. The benefit of dual-port is redundancy and data availability because if one of the host systems is down (due to hardware failure for instance), the data is still accessible through the second host. This is a feature borrowed from SAS and the Z-Drive 6000 is actually the first NVMe drive to have dual-port support, which is something OCZ said its customers have been looking for.
Typical enterprise-class features, such as AES-256 encryption, full power loss protection and end-to-end data protection are all included as well. The Z-Drive 6000 series also features user-configurable power modes (15W, 20W and 25W), which can be used to limit the power consumption (and performance) in more temperature critical environments. A 2.5" 25W drive will definitely run hot and require a high amount of airflow for cooling, although OCZ did pay close attention to the chassis design to maximize heat dissipation and avoid throttling issues.
|OCZ Z-Drive 6000 Series Performance Specifications|
|Raw NAND Capacity||1,024GiB||2,048GiB||4,096GiB||1,024GiB||2,048GiB||4,096GiB|
|128KB Sequential Read||2.2GB/s||2.9GB/s||2.9GB/s||2.2GB/s||2.9GB/s||2.9GB/s|
|128KB Sequential Write||1.3GB/s||1.9GB/s||1.9GB/s||1.0GB/s||1.4GB/s||1.4GB/s|
|4KB Random Read||600K IOPS||700K IOPS||700K IOPS||600K IOPS||700K IOPS||700K IOPS|
|4KB Random Write||115K IOPS||160K IOPS||160K IOPS||75K IOPS||120K IOPS||120K IOPS|
|Mixed 4KB 30R / 70W||290K IOPS||330K IOPS||330K IOPS||230K IOPS||280K IOPS||280K IOPS|
|Idle Power Consumption||9W||9W||9W||9W||9W||9W|
|Active Power Consumption||25W||25W||25W||25W||25W||25W|
OCZ focused specifically on read performance and at up to 700K random read IOPS, the Z-Drive is definitely top of the class as Intel specs the P3700 at only 460K IOPS. Random write and mixed performance look excellent too, so it will be very interesting to see how the Z-Drive 6000 stacks up against the Intel and Samsung drives in objective third party testing. Note that the Z-Drive 6300 with eMLC is a bit slower in writes, which is due to the fact that eMLC NAND has higher program latencies (basically the voltage distribution for each voltage state is smaller, so programming requires more precision that is achieved by increasing the number of program pulse and verification iterations).
OCZ's own testing data puts the Z-Drive 6000 way ahead of the competition in terms of performance and consistency in both reads and writes. I would of course take the data with a grain of salt, but if the Z-Drive 6000 series is really as good as OCZ's marketing suggests, then OCZ has one hell of a drive in its hands. OCZ is currently sampling the Z-Drive 6000 series to key customers and partners, so I would expect more widespread availability to be later this year. All in all, it's a very potent drive that could very well help OCZ gain some market share in the enterprise space.
Post Your CommentPlease log in or sign up to comment.
View All Comments
nils_ - Friday, May 29, 2015 - linkAlthough at some point you will get problems with cooling, power distribution etc. especially in older data centers. Real estate is rather cheap compared.
MikhailT - Wednesday, May 20, 2015 - linkIn the data centers, you have to pay for the space (network, power, and others as well) and they're expensive to rent out as you can't just build a data center anywhere you want.
The more dense and localized your server racks are, the more money you save in the long run.
jann5s - Wednesday, May 20, 2015 - linkWhy does this drive require 15mm thickness? Is the internal volume really used?
Kristian Vättö - Wednesday, May 20, 2015 - linkInternally the drive consists of several (likely three) PCBs that are stacked on top of each other, hence the thickness. A single PCB isn't enough to incorporate 4TB of NAND along with a massive controller and capacitors for power loss protection.
RU482 - Wednesday, May 20, 2015 - linkwho are they making this drive for exactly? After their last product announcement, I visited their website and inquired about sampling (I work for a server OEM), and got no response. If they aren't following up with OEM requests, who ARE they marketing their enterprise product to?
ocz_tuff_bunny - Wednesday, May 20, 2015 - linkHi RU482 thank you for your comment. As an OCZ representative I'm sorry to hear you didn't get a response when you inquired about sampling during our last product announcement. The Z-Drive 6000 SSD series are made for OEMs. Please use this link http://ocz.com/enterprise/contact/americas-office to contact us and we will make sure you are taken care of.
vishnumrao - Wednesday, May 20, 2015 - linkI would like you guys to do a performance & reliability comparison article between the OCZ, Intel, Samsung & HGST NVME drives.
nikhil.hwd - Wednesday, May 20, 2015 - link+1
Kristian Vättö - Thursday, May 21, 2015 - linkPerformance we can do, but reliability is something that would require dozens of samples and months of work to provide any relevant data for analysis.
vishnumrao - Thursday, May 21, 2015 - linkYes, I agree reliability testing will be difficult for you to do! Hopefully we can get a comparison article on the 4 enterprise offerings!