Final Words

After Intel's price cuts we mentioned that despite Penryn's imminent launch, CPUs had gotten too affordable to pass up building a system now if you needed. Now that we have a general idea of clock-for-clock performance differences between Conroe and Wolfdale, we're not nearly as worried about recommending that you build systems today as we once were. There's no doubt that Wolfdale is faster clock-for-clock, but keep in mind that you won't see Wolfdale until Q1 of next year and the performance advantage simply isn't great enough to justify delaying a purchase by 6+ months if you need a system now.

AMD seems quite confident that Phenom will be able to compete with Conroe/Kentsfield; if the race is really close between those cores, Penryn could be exactly what Intel needs to remain technically ahead in performance. If Phenom is significantly faster than Conroe/Kentsfield, then it doesn't look like Penryn will be able to save Intel. We should know for sure which scenario will pan out in the not too distant future.

We've got more Penryn coverage coming, including a look at Yorkfield vs. Kentsfield so stay tuned.

The Rest of the Tests
Comments Locked

55 Comments

View All Comments

  • OddTSi - Tuesday, August 21, 2007 - link

    Exactly. As I was scrolling down that overclocking page I actually expected them to show what they did (how high it goes without a voltage bump) and then to cap it off at the very bottom with a "oh, here's the absolute highest we could get it to" screen shot.

    Go back in the lab Anand, stick the biggest HSF you've got on there and crank it up until it can't go up anymore and tell us what you got it to. ;)
  • gigahertz20 - Tuesday, August 21, 2007 - link

    Anand has been slacking, first in the Q6600 GO article he forgets to mention what HSF he used and now he forgets or didn't want to raise the stock core voltage to see what the maximum overclock is? Bahhhhhh, I nominate all articles to either be written by Wesley Fink, Gark Key, Jarred Walton, or Derek Wilson.
  • NullSubroutine - Tuesday, August 21, 2007 - link

    I would like to see such benchmarks as well, if you have the time constraints to do so.

    It would be interesting to compare 3.33 C vs 3.33 P to see what kind of scaling difference there is between the two. And just overall max clock with volt increase you could get with revision A0 (with benchmarks) it would be a good performance preview for a ways down the road.
  • retrospooty - Tuesday, August 21, 2007 - link

    "It would be interesting to compare 3.33 C vs 3.33 P to see what kind of scaling difference there is between the two. And just overall max clock with volt increase you could get with revision A0 (with benchmarks) it would be a good performance preview for a ways down the road"

    I second that. Hopefully the next review has what we all came to see = )

    Seriously though. since the cache has improvements, and is also larger, we may well see it scale better. In other words its an avg of 5% faster at a meager 2.33 ghz, but what about 3.5, or higher which I am sure could be achieved by raising voltage. It may be quite a bit more.
  • Hippiekiller - Tuesday, August 21, 2007 - link

    Im almost glad (almost) to see that the performance difference isnt that great. It would be interesting to see each company have similar performing parts.

    My question is would similar performance lead to an even more aggressive price war then the one we have seen recently? Or, would each company just stop at a relatively higher price then we currently see, not willing to slash unless it has to in order to counter the others move.
  • Spoelie - Tuesday, August 21, 2007 - link

    You're not taking into consideration the higher clock speeds penryn will undoubtly have, which moves the performance delta up a bit more than the 5% at the, most likely, equal pricepoints of conroe chips.
  • FujiT - Tuesday, August 21, 2007 - link

    ok, Penryn is a die shrink with some tweaks. The average boost is 5% and that's not including the boost from SSE4 which pretty much results in a 100% boost in performance.

    And the retail Penryns will probably overclock better. The initial stepping supposedly had some problems reaching the high clock speeds that Intel promised, but it's been said that the new stepping solved that problem.

    With Penryn, the performance boost not only comes out from the IPC increase, but the performance in clock speed. It's supposed to top out at 4 GHz (according to Intel) and Nehalem is supposed to pick up where Penryn left off clock speed wise.
  • duploxxx - Wednesday, August 22, 2007 - link

    the IPC performance increase is minimal, when a program likes more cache it is faster, if not it is the same. these benches from anand show it.

    we'll see how far it will go with penryn and GHZ, in Q1 2007 they were not sure if they were able to fit the 3,33GHZ into a 120W TDP !!!!

    About you're future... if it said by intel then leave it here out of the comments to ne you are just a fanboy, Nehalem is still vaporware and you guys are already hyping it... memorycontroller and fast huge on die caches do not work together....!!!!!

    @anand, what was the stepping of you're conroe versus wolfdale.
  • fitten - Thursday, August 23, 2007 - link

    quote:

    memorycontroller and fast huge on die caches do not work together....!!!!!


    Why do you say that?
  • GhandiInstinct - Tuesday, August 21, 2007 - link

    quote:

    Wolfdale is faster clock-for-clock, but keep in mind that you won't see Wolfdale until Q1 of next year and the performance advantage simply isn't great enough to justify delaying a purchase by 6+ months if you need a system now.


    I love having an answer to the #1 question in my head for months.

    Thank you AnandTech!

Log in

Don't have an account? Sign up now