Doom 3 Performance

The standard X800 GTO doesn't do quite as well here against the NVIDIA 6600 GT when testing with Doom 3, similar to the results of Bf2 testing. NVIDIA cards seem to have a slight edge over ATI in this game with certain settings, but the GTO still performs decently with this game, aside from struggling a little at 1600x1200 with AA enabled.

Doom 3

Doom 3

Doom 3

Doom 3

Test Setup/Battlefield 2 Performance Half Life 2 Performance
Comments Locked

27 Comments

View All Comments

  • Le Québécois - Monday, December 26, 2005 - link

    Is it just me or the PowerColor GTO 16 has the exact same spec as the standart ATI Radeon X800XL?
  • AtaStrumf - Monday, December 26, 2005 - link

    Almost. X800XL runs at 400/500 vs. 400/490 of the GTO 16. They also both use the same .11 mikron R430 chip.
  • mamisano - Monday, December 26, 2005 - link

    Wow, you guys are getting really soft lately. The GTO2's main claim to fame is the ability to unlock the 4 extra pipelines and the tremendous overclocking headroom available. At least give it a try, it can always be flashed back if you experience problems.

    Second, did you actually remove any of the HS units to determine the actual core installed on each card? That and a list of brand/speed of memory used on each one would have been very beneficial to the overall review.

    Seems to be another in a line of reviews with decreasing quality.
  • AtaStrumf - Monday, December 26, 2005 - link

    I absolutely agree! Very low quality review and VERY, VERY late!!!
  • Zoomer - Monday, December 26, 2005 - link

    I research all of these cards before settling with the c3d gto - and I would have gotten the gto2 if it was avaliable.

    Sapphire GTO2
    R480
    Samsung 1.6ns

    C3D GTO
    R423
    Samsung 2.0ns

    PowerColor
    R430
    Samsung 2.0ns

    An article at anandtech commented on why the Powercolor card (the R430) can't hit high clocks - although it uses a smaller process, the 130nm uses a low k process. The 110nm process does NOT. The article goes on to say that this shrink was to cut costs, at the expense of clock speed.

    However, it is interesting to note that the die shrink didn't do anything to reduce power draw. An investigation into the voltages the R430 is running at is in order. :)

    One more thing to note - the c3d has VIVO, with a rage theatre chip soldered (as usual) on the board.

    I can't remember the ones for ultimtate, but the fireblade should also be using 1.6ns rams.
  • tuteja1986 - Monday, December 26, 2005 - link

    I wonder why anandtech never did it earlier ;(
  • coldpower27 - Monday, December 26, 2005 - link

    At least the different manufacturer made it interesting, and customized the boards a little bit to differentiate from one another and not stick to the reference design.

    The 6800 GS is quite the competitor for the X800 GTO, and from my persepctive is a better buy if you want something straight out of the box save for the Powercolor X800 GTO 16. Though there is also the XFX Edition clocked at 485/1100 to worry about.

Log in

Don't have an account? Sign up now