AnandTech Storage Bench - The Destroyer

The Destroyer is an extremely long test replicating the access patterns of very IO-intensive desktop usage. A detailed breakdown can be found in this article. Like real-world usage, the drives do get the occasional break that allows for some background garbage collection and flushing caches, but those idle times are limited to 25ms so that it doesn't take all week to run the test. These AnandTech Storage Bench (ATSB) tests do not involve running the actual applications that generated the workloads, so the scores are relatively insensitive to changes in CPU performance and RAM from our new testbed, but the jump to a newer version of Windows and the newer storage drivers can have an impact.

We quantify performance on this test by reporting the drive's average data throughput, the average latency of the I/O operations, and the total energy used by the drive over the course of the test.

ATSB The Destroyer
Average Data Rate
Average Latency Average Read Latency Average Write Latency
99th Percentile Latency 99th Percentile Read Latency 99th Percentile Write Latency
Energy Usage

The Sabrent Rocket Q turns in shockingly good scores on The Destroyer, matching the Samsung 970 EVO Plus, a high-end TLC SSD. The reason why the decidedly less high-end Rocket Q can do this is due entirely to the extreme capacity. For the first time, we have a drive that can handle The Destroyer entirely in its SLC cache. That means the results here are a bit misleading, as the drive would not be able to sustain this level of performance if it was full enough to reduce the SLC cache capacity down to more typical sizes. Power efficiency is also pretty decent here, but again operating out of the SLC cache helps.

Meanwhile, the 8TB Samsung 870 QVO turns in pretty much the same performance scores as the 4TB model, as expected. However, the 8TB drive is a little bit more power-hungry due to the higher part count.

AnandTech Storage Bench - Heavy

Our Heavy storage benchmark is proportionally more write-heavy than The Destroyer, but much shorter overall. The total writes in the Heavy test aren't enough to fill the drive, so performance never drops down to steady state. This test is far more representative of a power user's day to day usage, and is heavily influenced by the drive's peak performance. The Heavy workload test details can be found here. This test is run twice, once on a freshly erased drive and once after filling the drive with sequential writes.

ATSB Heavy
Average Data Rate
Average Latency Average Read Latency Average Write Latency
99th Percentile Latency 99th Percentile Read Latency 99th Percentile Write Latency
Energy Usage

The Heavy test doesn't allow the Sabrent Rocket Q a unique advantage from its massive SLC cache; the smaller high-end NVMe drives can also make good use of their caches and overtake the Rocket Q's performance. However, it does appear that the sheer capacity of the 8TB Rocket Q continues to help significantly on the full-drive test runs. We haven't measured it directly, but I suspect the minimum SLC cache size reached when the drive is full is still quite a bit larger than what the 2TB and smaller drives have to work with, and that's how the Rocket Q avoids the horrible latency spikes that the other QLC drives suffer from.

As on The Destroyer, the 8TB Samsung 870 QVO shows no major differences in performance or efficiency from the 4TB model, which means it's still clearly a bit on the slow side even by SATA standards—especially when full.

AnandTech Storage Bench - Light

Our Light storage test has relatively more sequential accesses and lower queue depths than The Destroyer or the Heavy test, and it's by far the shortest test overall. It's based largely on applications that aren't highly dependent on storage performance, so this is a test more of application launch times and file load times. This test can be seen as the sum of all the little delays in daily usage, but with the idle times trimmed to 25ms it takes less than half an hour to run. Details of the Light test can be found here. As with the ATSB Heavy test, this test is run with the drive both freshly erased and empty, and after filling the drive with sequential writes.

ATSB Light
Average Data Rate
Average Latency Average Read Latency Average Write Latency
99th Percentile Latency 99th Percentile Read Latency 99th Percentile Write Latency
Energy Usage

The 8TB Sabrent Rocket Q offers decent performance on the Light test, even when full: it still provides a large enough SLC cache to handle all the writes from this test. A lot of smaller drives (using QLC or TLC) can't manage that and show greatly increased write latency on the full-drive test runs.

The 8TB Samsung 870 QVO shows slightly improved latency scores on the full-drive test run compared to the 4TB model, but otherwise performance is the same as expected. As usual, the 8TB QVO is a bit more power-hungry than the smaller versions, and the Rocket Q is considerably more power-hungry than the smaller low-end NVMe drives.

Cache Size Effects PCMark 10 Storage
Comments Locked

150 Comments

View All Comments

  • Oxford Guy - Tuesday, December 8, 2020 - link

    Samsung doing it isn’t shocking. It’s Samsung after all.
  • Palorim12 - Monday, December 14, 2020 - link

    idk if you remember when they did the change from TLC to 3-bit MLC, but I member. It was after all that stuff went down with the 840 EVO. Despite all TLC having this issue across all brands, Samsung was the first to push TLC, so when the slow down issue creeped up, Samsung got the brunt of the complaints, and ppl to this day will use that as a reason as why Samsung "sucks", despite the fact that the issue started creeping up on sandisk and other TLC drives that had entered the market much later after Samsung did. And by the time Samsung figured out the problem and fixed it, all the other manufacturers copied the fix and then really started pushing their own TLC products.

    And TBH, TLC products since then have been pretty good. I recommend 850 EVOs, and now 860 EVOs to all my friends who want to switch to SSDs but are worried about the price. I've only recommended 2-bit MLC drives to ppl who I know will hit the drive had with writes with the type of work they do.
  • at_clucks - Wednesday, December 9, 2020 - link

    @shabby, other companies have done worse if you ask me, like switching from MLC to TLC mid way through a product's run. Good luck with identifying the exact type of NAND based on decoding a SN without having the decoder ring, especially when the product is still in the store's warehouse.
  • phoenix_rizzen - Monday, December 7, 2020 - link

    Switching to a number would really simplify things.

    1LC
    2LC
    3LC
    4LC
    ...

    But since when has logic been part of marketing?
  • Billy Tallis - Monday, December 14, 2020 - link

    I've already pretty much decided that if we ever get real products that store 5 bits per cell, I won't use any abbreviations that don't include the numeral 5. Stuff like 3bpc, 4bpc, 5bpc would make a lot more sense than current industry conventions.
  • redzo - Tuesday, December 22, 2020 - link

    This. It's been a long time since my last post at anand.

    Consumers have no idea of what they are purchasing. They are basically sheep.

    QVO is nice if it is priced right. It should be priced way less.

    I just purchased a 3d nand TLC 1TB for less than an intel/crucial/samsung qvo equivalent. This is not right. Manufacturers of NAND flash and product manufacturers are taking advantage of misinformed consumers.

    More so. Most products are missing important specs like controller model, dramless or not, or even NAND type. This is just ridiculous.
  • dontlistentome - Saturday, December 5, 2020 - link

    If you want MLC or TLC then buy it - they cost more because they cost more to make. I've just bought a 2TB SSD for the old man - paid the 15% or so extra for TLC over QLC.
    There's no conspiracy here or evil manufacturers. They do R&D then offer a product and see if consumers buy it. Almost all consumers, even those that claim not to be are driven pricipally by price, hence QLC being populat when the buyer looks at the ticket.
  • Oxford Guy - Sunday, December 6, 2020 - link

    Economy of scale makes your comment fail.
  • DigitalFreak - Monday, December 7, 2020 - link

    +1 for your mad rhyming skills.
  • Kangal - Tuesday, December 8, 2020 - link

    Lmao.
    But for real, I thought we would have hit 8TB Sata-SSDs like last year for around USD $650. Instead I'm seeing these still yet to launch proper, and priced around $1,000. It's definitely true the market isn't dominated as much by the consumers, as it is dominated by the actual suppliers.

Log in

Don't have an account? Sign up now