The AMD TRX40 Motherboard Overview: 12 New Motherboards Analyzed
by Gavin Bonshor on November 28, 2019 9:00 AM EST- Posted in
- Motherboards
- AMD
- MSI
- Gigabyte
- ASRock
- Asus
- TRX40
- Threadripper 3000
- Castle Peak
ASUS Prime TRX40-Pro
The last of the three TRX40 models from ASUS is the ASUS Prime TRX40-Pro. Part of its Prime series, it blends its usual white and silver aesthetic, with a more professional styling and straight-edge looks. The ATX sized PCB has plenty of features including three full-length PCIe 4.0 x16 slots, three PCIe 4.0 x4 M.2 slots, and eight SATA ports. The Prime TRX40-Pro sits towards the bottom of its TRX40 product stack offering users the basics while remaining competitive with other TRX40 models.
Focusing on the design of the ASUS Prime TRX40-Pro, its main design consists of a silver and white color scheme, with a rear panel cover doubling up as a power delivery heatsink, and a M.2 heatsink which amalgamates into the design of the chipset heatsink. The board has three PCIe 4.0 x4 M.2 slots with two of these sitting underneath a large silver aluminium heatsink, with the other M.2 slot installed vertically; an adapter comes in the accessories bundle. This also includes eight SATA ports with support for RAID 0, 1 and 10 arrays. On the PCIe front, there are three full-length PCIe 4.0 x16 slots, with a smaller PCIe 4.0 x4 slot located at the bottom. Directly below the PCIe 4.0 x4 slot is a power button, and a two-digit LED debugger. Next to this is a
As with the vast majority of TRX40 boards at launch, the ASUS Prime TRX40-Pro has support for DDR4-4666 and 256 GB of system memory across eight slots. The CPU power delivery looks impressive for a non-enthusiast model with a 16-phase design which is controlled by an undesignated controller. We know that ASUS using teamed power stages as they did with its X570 product stack. Delivering power to the CPU is a pair of 8-pin 12 V ATX CPU power connectors, with one located at either side at the top of the board. For cooling, the ASUS Prime TRX40-Pro has seven 4-pin headers which include two for CPU fans, three for chassis fans, one for an AIO pump, and another for a water pump.
The rear panel includes three USB 3.1 G2 Type-A, one USB 3.1 G2 Type-C, and six USB 3.1 G1 Type-A ports. A handily located BIOS Flashback button sits towards the left-hand side, while on the right-hand side are five color-coded 3.5 mm audio jacks and S/PDIF optical output controlled by a Realtek ALC S1220 HD audio codec. The single networking port is controlled by an Intel I211-AT Gigabit Ethernet controller.
Although the ASUS Prime TRX40-Pro omits things like Wi-Fi 6 and uprated 2.5/5/10 GbE ethernet, it still comes with an MSRP of $450. While it may seem a little off the mark in terms of pricing, the Prime TRX40-Pro has a very subtle and professional design, with a competitive feature set, and plenty of storage support for users building a workstation using the AMD Threadripper 3000 series processors.
Facebook
Twitter
RSS
109 Comments
View All Comments
PopinFRESH007 - Sunday, December 29, 2019 - link
PCIe is a serial point to point topology so each link or "lane" is independent (ignoring things like PCIe switches). This is different to the legacy PCI bus which is a shared parallel bus which would behave as you've described.Dionysos1234 - Thursday, November 28, 2019 - link
Any information on what memory is supported? ECC?Llawehtdliub - Saturday, November 30, 2019 - link
Yes ECC is supportedVatharian - Thursday, November 28, 2019 - link
Has anyone from ASUS actually thought even for a second about the PCI-Express slots placement? Using dual GPUs, until converted truly to single slot with water cooling, blocks most of the slots. In my case I'd need 4 or 5 slots, which leaves ROG Zenith II Extreme from their linup. And ASRock Creator. As much as I hate Gigabyte I must admit their Aorus line has sensible layouts, and MSI's are mixed bag.nevcairiel - Thursday, November 28, 2019 - link
These boards are clearly not designed for Dual GPU purposes, but instead actually offer quite some space for the primary GPU (3 slots is mandatory for many high-end air cooled cards these days), and additional slots for other 1 slot cards.eek2121 - Friday, November 29, 2019 - link
Nearly every board I looked at in the article has spacing for multiple GPUs.eek2121 - Friday, November 29, 2019 - link
I noticed you said 3 slots. I have a high end GPU, it takes 2 slots. The 3rd slot is extremely far away from the 2nd slot and could comfortably fit a GPU. Factor in the width of an m.2 drive when looking at the pictures above and you'll realize you are mistaken (many of the boards have m.2 slots in between, That is all the space you need for air cooling a GPU, since most high end hardware only takes up 2 slots, the 3rd 'slot' is actually where an M.2 drive would sit, and the real third slot is below it, leaving plenty of space for cooling fan air circulation).Spunjji - Friday, November 29, 2019 - link
Serious question - are dual-GPUs even used these days?I know they're out for gaming, but I don't know the state of play regarding GPU compute.
Bccc1 - Friday, November 29, 2019 - link
For GPU rendering (e.g. Redshift, Octane and VRay Next) dual GPUs are quite common and even quad GPUs can be used quite efficiently.eek2121 - Friday, November 29, 2019 - link
I don't kow about the "blocking most of the slots" terminology. On my X399 board, only 1 slot is blocked (and technically you still could put a card in that slot, I actually had a low profile x4 card next to my GPU without any heat issues). On many X570 boards, spacing is such that no slots are blocked. In both cases, there are single slot GPUs, just not high end ones. As you've stated, using a custom loop allows for even high end GPUs to use only 1 slot.